Water Washable Resin Plus, 3D Printer UV 405 Nm Resin With High Precision

Prezzo di listino: €52,08
Prezzo scontato: €52,08
Prezzo di listino
Prezzo unitario: per

Imposte incluse. Spedizione calcolata al momento del pagamento.

Resin Washable IN Water Plus, Resin Printer 3D UV 405 NM With High Precision

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.

【Super Easy to Clean】Anycubic Resin Water Washable+ contains hydrophilic groups with good water solubility, which can be cleaned directly with water.
【High Precision, Low Shrinkage】Anycubic UV resin prints the patterns with low shrinkage during the photo curing process, which ensures the high precision and smooth surface. The low shrinkage rate ensures that each model is printed with good detail.
【Low Odor】The water-washable photopolymer resin has low odor and can ensure customers have a better printing experience. It has less odor than other resins in the Anycubic series.
【High fluidity】The low viscosity of the printing process greatly improves the viscosity of the resin. Anycubic water washable resin has a longer shelf life of up to 1.5 years to help the resin retain longer and safer use.
【Widely Compatible】Compatible with 365-405nm broadband, Anycubic resin is suitable for most DLP LCD 3D printers on the market, better effect with Anycubic LCD 3D printers.

Product description

Tips for storage and use:

1. Store sealed and protected from light at room temperature. Avoid heat or sunlight.

2. Recommended temperature: 18-35℃. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (no more than 60℃) before use.

3. If the pigment settles in the resin, mix or shake well before use.

4. In order to ensure the desired properties of the cured materials, it is necessary to control the intensity and time of the light source during subsequent polymerization. Therefore, it is suggested that:

(1) The intensity of the mercury lamp or LED light source is 5-10 MW/m2, and the duration should not exceed 1 hour (self-regulation);

(2) The duration of sun exposure (summer) should be controlled at about 1 hour;

(3) Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited;

(4) It is recommended to print in a dark room or cover when printing.

Tip: *It is not recommended to pour cleaning waste directly into the drain. It is recommended to vaporize or heat the water outdoors, and then use light to harden the residual resin.

Water washable and easy to clean.
Higher precision and better printing details.
Widely compatible with various DLP, LCD 3D printers, compatible with Photon Mono/Mono X/M3, Mars etc.
More colors to choose from, unleash your creative potential.
Validity period: 1.5 years.

ANYCUBIC Water washable resin plus for 3D printer

Characteristics:

Density: 1.15-1.2 g/cm³

Viscosity: 150-250 cP or mPa·s

Surface hardness: 80HD

Tensile strength: 30-45 MPa

Normal exposure: 2-3 s

Elongation at break: 8%-15%

Molding shrinkage: 3.72%-4.24%

Flexural strength: 50-60 MPa

Flexural modulus: 1500-1600 MPa

Exposure of the 1st layer: 35 sec

Multiple choices, no limitations

ANYCUBIC water washable resin supports 2 washing modes: 1.Anycubic Wash & Cure, 2.running water wash.

Low viscosity, fast printing

ANYCUBIC 3D Water Wash Resin low viscosity means it has great fluidity during the printing process and helps improve printing speed.

Long duration

ANYCUBIC upgraded water washable resin has a longer shelf life of up to 1.5 years, to help the resin retain longer and safer use.

Low shrinkage and high speed

Printing with high drying speed and low shrinkage rate provides excellent printing experience and effects. And molding shrinkage starting from 3.7%.

High quality prints without cracks

ANYCUBIC Product Lab shows that models printed with our resin can be stored for 3 years in natural environment without cracks after curing. (Different models and environments may cause differences in experimental results)

Greater precision

Based on ANYCUBIC photosensitive resin, specific proportions of nanoscale microcrystalline ceramic powders are added to make the resin more sensitive to light and achieve high-precision prints.

For perfect and successful printing, please refer to the User Manual in the "Product Guides and Documents" section of this page for more detailed information.

ANYCUBIC Resin Recommendation Index（The higher the star, the better the performance）

Rigidity	*****	****	***	*****	**	***
Toughness	*	*	***	*	*****	**
Precision	****	****	***	****	****	****
Low odor	***	****	***	*****	****	****
Easy to clean	***	*****	***	****	***	***
Formability	*****	*****	*****	*****	****	*****

LCD type	N/A	N/A	9.25" Mono LCD	6.23'' Mono LCD	7.6" Mono LCD	9.25'' Mono LCD
Print format	N/A	N/A	197×122×245mm	132×80×165mm	163x102x180mm	197x122x245mm
XY resolution	N/A	N/A	5760 x 3600(6K)	3840x2400(4K)	4096 * 2560(4K+)	5760 x 3600(6K)
Layer thickness	N/A	N/A	0.05mm	0.01-0.15mm	0.01-0.15mm	0.01-0.15mm
Z-axis accuracy	N/A	N/A	0.01mm	0.01mm	0.01mm	0.01mm
Maximum printing speed	N/A	N/A	100mm/h	50mm/h	50mm/h	80mm/h

Taglia	1000g
Type	Does not apply
Brand	Does not apply
Colore	Grigio
EAN	07445045258222